Product Description

A sculptural counterbalance floor lamp built around a tall rectangular column base in red, with a yellow angled support rod, a blue horizontal arm extending outward on a tension cable, and a small cylindrical adjustable light head at the tip all finished in glossy primary-color enamel on a white square base plate. Available in two sizes: a Small floor-lamp scale at L 29.5 H 66.9 (L 75 H 170 cm) with an E27 socket, or a Large statement scale at L 74 H 109 (L 188 H 277 cm) with an integrated COB LED. Hand-finished enamel on welded steel.

Counterbalanced arm

Tension-cable counterweight balances the arm at any angle within its travel range.

Cylindrical head

The light head rotates and tilts at the tip of the arm for directional task or accent light.

Primary-color enamel

Hand-finished gloss enamel in red, yellow, and blue on a white square base plate vivid, durable, easy to wipe.

A single color composition across both sizes. Each painted section is a saturated gloss enamel against the white base plate.

Colors above are digital approximations of glossy enamel. Actual finish may shift slightly with lighting and your screen.

2 SKUs total single color composition, two sizes. Large size requires a ceiling clearance of at least 9.5 ft (290 cm) in its upright orientation. Check your space before ordering Large.

The Large is a 9-foot floor lamp confirm ceiling height first

The Large floor lamp stands 277 cm (109 / 9 ft 1) in its upright orientation, with an arm reach of 188 cm (74 / 6 ft 2). Typical residential ceilings of 8 ft (240 cm) cannot accommodate the Large upright. Recommended ceiling clearance is at least 9.5 ft (290 cm). The Large is sized for double-height residential lofts, hotel lobbies, retail showrooms, gallery spaces, and double-height entryways. If unsure, measure ceiling height first or email us for sizing advice. For typical residential ceilings, the Small size is the right choice.

E27 bulb sold separately (Small size only)

The Small size has a standard E27 (Edison screw) socket in the cylindrical head. The bulb is not included. We recommend a warm-white LED at 27003000K, around 600800 lumens, in a standard A-shape bulb up to 40W equivalent. A directional reflector LED works well since the head focuses the beam a narrow beam reads as task light, a wider beam as accent.

Integrated COB LED (Large size only)

The Large size has an integrated COB LED module built into the cylindrical head, warm-white in color temperature. The COB module is sealed inside the head and is not user-replaceable if the module fails, return for service under warranty. For exact wattage and lumen output, see the spec sheet PDF or email us before ordering.

Gloss enamel on welded steel, hand-finished

Each lamp is welded from steel tubing and flat plate, then hand-finished in glossy enamel red on the rectangular column, yellow on the angled support rod, blue on the horizontal arm, plus a white base plate. The enamel is durable in normal use but can chip if knocked hard. Touch-ups with matching enamel are possible at home. For project quantities or a custom color composition (single color, two color, or alternative palette), email us before ordering.

Official dimension sheets for both sizes. Click to enlarge.

• Confirm your ceiling height before unboxing the Large at least 290 cm (9.5 ft) clearance is required for upright orientation. The Small needs at least 180 cm (6 ft) of clearance and fits comfortably in standard residential rooms.
• Allow floor space for the arm reach: Small needs at least 90 cm (3 ft) clear in front of the base; Large needs at least 200 cm (6.5 ft).
• Unpack carefully the painted finish is durable but can chip if knocked against the carton edge. Lift the lamp by the column or the white base plate, not by the arm or the cable.
• Set the white base plate on a flat, level floor. The plate is heavy steel and stays put on its own; no anchoring needed for typical use, though for high-traffic commercial installs we recommend anchoring the plate to the floor.
• For the Small, install one E27 bulb up to 40W equivalent (warm-white LED recommended). For the Large, the COB module is already inside the head.
• Plug into a standard outlet; use the in-line cord switch on the cable to turn the lamp on and off. Adjust the cylindrical head's rotation and tilt by hand the friction joints hold position once set.
• Adjust the counterbalanced arm angle by hand. The tension-cable joint holds the chosen angle through friction. Do not force the arm beyond its travel range.
• Indoor dry locations only not rated for bathrooms, covered porches, or outdoor use.
• Wipe the enamel with a soft, dry cloth as needed. Small chips on the painted finish can be touched up with matching enamel paint. Avoid abrasive cleaners and solvents, which can soften the gloss.

The Small at H 170 cm (66.9) fits a typical residential room with an 8 ft ceiling a living-room reading corner, a study, beside a sofa, or in a bedroom. The Large at H 277 cm (109) is a 9-foot statement piece it needs at least 9.5 ft (290 cm) of ceiling clearance and a generous floor footprint. Large is sized for double-height lofts, hotel lobbies, retail showrooms, gallery spaces, and grand entryways. If your ceiling is standard residential, choose the Small.

The Small has an E27 (Edison screw) socket and the bulb is not included we recommend a warm-white LED at 27003000K, 600800 lumens, in a standard A-shape bulb up to 40W equivalent. A directional reflector LED works well since the head focuses the beam. The Large has an integrated COB LED module built into the head; no separate bulb is needed. The COB module is sealed inside and not user-replaceable; warranty covers module failure.

The horizontal arm is supported by an angled rod and held in balance by a thin tension cable that runs between the column and the arm. The joints hold their position through friction adjust the arm angle by hand, let go, and the arm stays where you put it. The cylindrical head at the tip rotates and tilts the same way. Don't force the arm past its travel range; gentle, deliberate adjustment is all the lamp asks for.

The lamp is finished in glossy enamel paint, hand-applied in sections. Within a single SKU the colors are consistent, but small lot-to-lot variation in shade and gloss is normal. The photos on this page are representative of the in-hand finish. The digital color bar above is a screen approximation; actual enamel may read slightly different in your room's lighting.

2-year warranty against manufacturing defects in the welds, wiring, socket, joints, and painted finish under normal indoor use. For the Large, the integrated COB LED module is covered under the same 2-year window if it fails in normal use, return for service or replacement. Email support with your order number if anything arrives damaged or fails in normal use. Minor lot-to-lot variation in enamel tone, small chips from impact, and damage from forcing the arm past its travel range are not covered.

{ "@context": "https://schema.org", "@type": "ProductGroup", "name": "Articulated Counterbalance Floor Lamp", "description": "A sculptural counterbalance floor lamp on a tall rectangular red column base with a white square base plate, a yellow angled support rod, a blue horizontal arm on a tension cable, and a small cylindrical adjustable light head hand-finished in glossy primary-color enamel on welded steel. Available in two sizes: Small at L 75 H 170 cm with an E27 socket, or Large at L 188 H 277 cm with an integrated COB LED. Indoor dry locations only.", "image": ["PRODUCT_IMAGE_FULL_URL"], "brand": { "@type": "Brand", "name": "Vakkerlight" }, "variesBy": ["https://schema.org/size"], "additionalProperty": [ { "@type": "PropertyValue", "name": "Color composition", "value": "Red, Yellow, Blue, and White" }, { "@type": "PropertyValue", "name": "Material", "value": "Welded steel, hand-finished gloss enamel" }, { "@type": "PropertyValue", "name": "Articulation", "value": "Counterbalanced arm on tension cable" }, { "@type": "PropertyValue", "name": "Mount", "value": "Free-standing, plug-in" } ], "hasVariant": [ { "@type": "Product", "name": "Articulated Counterbalance Floor Lamp Small", "description": "Small size, L 29.5 inches by H 66.9 inches (L 75 cm by H 170 cm). Counterbalanced articulated floor lamp in red, yellow, blue, and white gloss enamel on welded steel. One E27 socket in the cylindrical head; bulb sold separately. Fits a standard residential room.", "image": "DIAGRAM_SMALL_URL", "material": "Welded steel, gloss enamel", "color": "Red, Yellow, Blue, White", "additionalProperty": [ { "@type": "PropertyValue", "name": "Light Source Base", "value": "E27" }, { "@type": "PropertyValue", "name": "Bulb Included", "value": "No sold separately" }, { "@type": "PropertyValue", "name": "Max Bulb Wattage", "value": "40W equivalent" }, { "@type": "PropertyValue", "name": "Required Ceiling Clearance", "value": "At least 180 cm (6 ft)" } ], "offers": { "@type": "Offer", "availability": "https://schema.org/InStock", "priceCurrency": "USD" } }, { "@type": "Product", "name": "Articulated Counterbalance Floor Lamp Large", "description": "Large size, L 74 inches by H 109 inches (L 188 cm by H 277 cm). Counterbalanced articulated floor lamp in red, yellow, blue, and white gloss enamel on welded steel. Integrated COB LED in the cylindrical head, warm-white, not user-replaceable. A 9-foot statement piece sized for double-height lofts, lobbies, galleries, retail, and grand entryways. Requires at least 290 cm (9.5 ft) of ceiling clearance.", "image": "DIAGRAM_LARGE_URL", "material": "Welded steel, gloss enamel", "color": "Red, Yellow, Blue, White", "additionalProperty": [ { "@type": "PropertyValue", "name": "Light Source", "value": "Integrated COB LED, warm-white" }, { "@type": "PropertyValue", "name": "Bulb Replaceable", "value": "No sealed module, warranty service if it fails" }, { "@type": "PropertyValue", "name": "Required Ceiling Clearance", "value": "At least 290 cm (9.5 ft)" } ], "offers": { "@type": "Offer", "availability": "https://schema.org/InStock", "priceCurrency": "USD" } } ]} { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "Which size fits my space?", "acceptedAnswer": { "@type": "Answer", "text": "The Small at H 170 cm (66.9 inches) fits a typical residential room with an 8 ft ceiling a living-room reading corner, a study, beside a sofa, or in a bedroom. The Large at H 277 cm (109 inches) is a 9-foot statement piece it needs at least 9.5 ft (290 cm) of ceiling clearance and a generous floor footprint. Large is sized for double-height lofts, hotel lobbies, retail showrooms, gallery spaces, and grand entryways. If your ceiling is standard residential, choose the Small." } }, { "@type": "Question", "name": "Which size needs a bulb, and what kind?", "acceptedAnswer": { "@type": "Answer", "text": "The Small has an E27 (Edison screw) socket and the bulb is not included we recommend a warm-white LED at 2700 to 3000K, 600 to 800 lumens, in a standard A-shape bulb up to 40W equivalent. A directional reflector LED works well since the head focuses the beam. The Large has an integrated COB LED module built into the head; no separate bulb is needed. The COB module is sealed inside and not user